FINGER JOINTED
PANEL
Ducerf has produced a wide range
of finger jointed panels for several uses : interior design, decoration, furniture,
staircases, worktops, kitchen, conference room...
This range combines the most hard
associating technical and attractive qualities.
 |
PATCHWOOD CLASSIC
- Finger jointed panels
- Pitch of the lamellae: 20 mm
+/- 1 mm
- Species : oak - beech - ash -
maple - cherry
iroko- sapele - sipo - walnut...
|
 |
PATCHWOOD
LINE
- Finger jointed panels with coloured
wood joints
- Pitch of the lamellae
: 20 mm +/- 1 mm
- Joints width : 15 / 10 mm
- Species : oak - beech - ash -
maple
- Joint colour : black, red, green,
blue coloured joints
|
 |
PATCHWOOD
SEA LINE
- Finger jointed panels with lamellae
with different colours
- Pitch of the lamellae : 20 and
9 mm +/- 1 mm
- Species : sipo/mahogany - ash
- sipo - maple
|
 |
PATCHWOOD
MASTER LINE
- Finger jointed with lamellae
with different colours
- Pitch of the lamellae : 20 mm
+/- 1 mm, 3 dark lamellae alternated with one light lamellae or vice
versa
- Species : sipo - mahogany - ash
- beech
|
*
oak worktops, beech, teak...thickness 26 / 31 / 40 mm.
** same thickness for all the patchwood ranges, for other sizes (50 m2 minimum)
: please contact us
TECHNICAL
RECOMMENDATIONS
In order to avoid the panel bowing before its final use, we advise you to maintain
the panels safe from the humidity and warm area in its original packaging. The
panels must be stocked ones of the others.
This panel is in wood and must be treated like a solid wood piece including
the area variation that can happen.
